Product details
elma noble clean is an acidic cleaner for the immersion cleaning bath for deoxidizing and brightening jewellery made of gold, silver, platinum and their alloys.
Content: 10 l
It brightens the jewellery within seconds. Available in an easy-to-handle 1 l wide-neck bottle or in larger volumes for refill; the bottle necks are wide enough to allow immersion of jewellery and cutlery. The cyanide-free noble clean makes the highly toxic cyanide-containing jewellery cleaners superfluous. Applicable as ready-for-use immersion bath, for wiping and for ultrasonic cleaning. The temporary tarnish protection prevents from retarnishing for a long time.
Not suitable for soft stones, pearls or corals!
Application and Dosage
Available units: 1l, 5l, 10l, 25 l
Hazardous material: YES
Disposal
The surfactants in our product meet the criteria for biodegradation as laid down in Annex III of the Regulation (EC) No 648/2004 on detergents.
The used cleaning solution can be fed into the public sewage system after neutralization; observe the local pH limit values and make sure that the contamination contained in the used cleaning solution complies with the local sewage regulations. Recommendation: use lye or lime for neutralization.
Hazard statements (H-statements)
Precautionary statements (P-statements)
Content: 10 l
It brightens the jewellery within seconds. Available in an easy-to-handle 1 l wide-neck bottle or in larger volumes for refill; the bottle necks are wide enough to allow immersion of jewellery and cutlery. The cyanide-free noble clean makes the highly toxic cyanide-containing jewellery cleaners superfluous. Applicable as ready-for-use immersion bath, for wiping and for ultrasonic cleaning. The temporary tarnish protection prevents from retarnishing for a long time.
Not suitable for soft stones, pearls or corals!
Application and Dosage
- Immersion bath: Immerse the jewellery in undiluted product for approx. 10-15 sec, observe cleaning result, if sufficiently brightened rinse with cold water and wipe with a dry cloth.
- Wiping: Apply a few drops on a cloth and wipe precious metal surfaces,
such as candlesticks, lamps or bowls. Then rinse with cold water and wipe with a dry cloth - Ultrasonic bath: Dilute elma noble clean concentrate with water at a ratio of 1:1.
Put the jewellery in the ultrasonic bath for approx. 30-45 sec,
observe cleaning result and if sufficiently brightened rinse with cold water and wipe with a dry cloth.
Available units: 1l, 5l, 10l, 25 l
Hazardous material: YES
Disposal
The surfactants in our product meet the criteria for biodegradation as laid down in Annex III of the Regulation (EC) No 648/2004 on detergents.
The used cleaning solution can be fed into the public sewage system after neutralization; observe the local pH limit values and make sure that the contamination contained in the used cleaning solution complies with the local sewage regulations. Recommendation: use lye or lime for neutralization.
Information according to REACH regulation:
Hazard statements (H-statements)
- H290 May be corrosive to metals.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H351 Suspected of causing cancer.
- H361d Suspected of damaging the unborn child.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements (P-statements)
- P405 Store locked up.
- P102 Keep out of reach of children.
- P201 Obtain special instructions before use.
- P261 Avoid breathing mist/vapours/spray.
- P280 Wear protective gloves/protective clothing/eye protection/face protection.
- P234 Keep only in original container.
- P273 Avoid release to the environment.
- P308+P313 IF exposed or concerned: Get medical advice/attention.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.