Product number: 3587.1000

Ora gold plating bath C

1 litre, ready to use

Produktdetails
Ora gold plating bath C
Ora gold plating baths are acidic electrolytes for gold plating non-ferrous metals and silver alloys with different precipitation alloys and therefore colours. The range of materials that can be plated can be significantly increased by prior application of an adhesive gold bath.
Under optimum conditions, high-gloss, adhesive gold layers with a thickness of up to 10 μm can be achieved.

Bright gold plating baths are used in conventional electroplating systems.

The pH value is adjusted with citric acid or sodium hydroxide if necessary.

Before electroplating, the surfaces to be coated must be cleaned and free of grease.


Technical data:


  • Gold content** (g/l): 4.0

  • Temperature (°C): 20 - 30

  • Exposure time (min): 10 - 45

  • Voltage (volts): 2.8 - 3.5

  • Current density (A/dm²): 1.0 - 2.5

  • Deposition (mg/Amin): 22

  • pH value: 3.5 - 4.5

  • Movement: Electrolyte or fabric movement

  • Anodes: Titanium, platinised

  • Tub material: Glass, acid-resistant plastic Plastic

  • Density (g/cm³): 16 - 17.5

  • Hardness (HV): 120 - 145

  • Layer thickness (µm): < 10


Delivery form: ready to use
Content: 1 litre
Colour: C (fine gold)
Dangerous goods: YES
Regeneration: Add regeneration concentrate 1 & 2 (ratio 1:1) after analysing.

** The precious metal content is calculated at the current daily rate!
Product number: 3587.1000

Ora gold plating bath C

1 litre, ready to use

passend zu