Product number:
3587.1100
Ora gold plating bath I
1 litre, ready to use
Produktdetails
Ora gold plating bath I
The Ora gold plating bath I is an acidic electrolyte for gold plating non-ferrous metals and silver alloys with different precipitation alloys and therefore colours. The range of materials that can be plated can be considerably increased by prior use of the adhesive gold bath.
Under optimum conditions, high-gloss, adhesive gold layers with a thickness of up to 10 μm can be achieved.
Bright gold plating baths are used in conventional electroplating systems.
The pH value is adjusted with citric acid or sodium hydroxide if necessary.
Before electroplating, the surfaces to be coated must be cleaned and free of grease.
Data:
Delivery form: ready to use
Content (litre): 1
Colour: Colour: I (light yellow)
Dangerous goods: YES
Regeneration: After analysing, add Regenerating Concentrate 1 & 2 (ratio 1:1).
Under optimum conditions, high-gloss, adhesive gold layers with a thickness of up to 10 μm can be achieved.
Bright gold plating baths are used in conventional electroplating systems.
The pH value is adjusted with citric acid or sodium hydroxide if necessary.
Before electroplating, the surfaces to be coated must be cleaned and free of grease.
Data:
- Gold content** (g/l): 4.0
- Temperature (°C): 20 - 30
- Exposure time (min): 10 - 45
- Voltage (volts): 2.8 - 3.5
- Current density (A/dm2): 1.0 - 2.5
- Deposition (mg/Amin): 22
- pH value: 3.5 - 4.5
- Movement of electrolyte or fabric
- Anodes: Titanium, platinised
- Tub material: Glass, acid-resistant plastic Plastic
- Density (g/cm²): 16 - 17.5
- Hardness (HV): 120 - 145
- Layer thickness (µm): < 10
Delivery form: ready to use
Content (litre): 1
Colour: Colour: I (light yellow)
Dangerous goods: YES
Regeneration: After analysing, add Regenerating Concentrate 1 & 2 (ratio 1:1).
Product number:
3587.1100
Ora gold plating bath I
1 litre, ready to use
passend zu
passend zu
