Rapid 2-phase superglue from UHU for bonding all common plastics

Special set, consisting of an activator pen (no. 1) and a tube of liquid superglue (no. 2)
Guarantees extremely strong bonding and is very easy to use.

Application area:
Ideal for the bonding of small surfaces.
For bonding all common plastics, such as PE, PP, PVC, PS, ABS, rubber and many more.
Not suitable for PTFE, Styrofoam, clothing textiles and leather.

Drying times: final strength after approx. 12 hours

Container sizes: 3 ml + 2g
Dangerous goods: NO

Instructions for use:

• Apply activator (No. 1) on both sides of the adhesive surfaces; let dry for about 60 sec.
  Close the pencil immediately after use.


• To open the adhesive (no. 2), screw the complete cap firmly onto the tube.
  To use, simply unscrew the top cap. Apply a thin layer of glue on one side.
  


• Press parts together immediately.


• Wipe the tip dry after use.


• Store in a cool place for longer shelf life.


• Stains/Residues: Remove excess adhesive immediately with a dry cloth.
  After curing, it is very difficult to remove excess adhesive.
  Acetone dissolves adhesive, but only very slowly (check suitability).


• Tips: When bonding at low humidity, the curing time can be shortened by briefly breathing on one of the parts to be bonded. The best bonding results are achieved at room temperature.

Technical specifications:
Looks: Colourless, crystal clear
Base: cyanoacrylate acid ethyl ester
Consistency: liquid
Density: approx. 1.07 g/cm³

Please note:
Adhesive: Contains cyanoacrylate. Bonds skin and eyelids together within seconds.
Keep out of the reach of children. Causes skin irritation. May irritate the respiratory system.
On contact with the skin: Wash with plenty of water and soap.
Activator: Liquid and vapour highly flammable. May cause drowsiness and dizziness.
Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition.
Do not smoke. Adhesive + Activator: Causes severe eye irritation.
If medical advice is required, have packaging or identification label ready.
Keep out of the reach of children. Avoid inhalation and vapour.
In case of contact with the eyes:
Rinse carefully with water for a few minutes. Remove existing contact lenses if possible. Rinse further.