WILAPLAT bright gold plating baths 750are acid electrolytes which are used for the gold plating of non-ferrous metals and silver alloys.
The spectrum of platable materials (e.g. steels) can be considerably increased by first using the Wilaplat AC3 preplating gold bath
(our Ref.no. 3580.7770).
Under optimal conditions, high gloss, durable adhesive gold layers with a thickness of up to 10 μm can be achieved.

WILAPLAT Bright Gold Plating Baths 750 can be used in conventional gold plating units such as the WILAPLAT-System.
As required, the pH value can be adjusted with citric acid or corrosive soda.
Before starting the procedure, the surfaces to be electroplated must be cleaned and free of grease.

Data:

• Gold content** (g/l): 4.0


• Temperature (°C): 20 – 30


• Exposure time (Min): 10 – 45


• Voltage (Volt): 2.8 – 3.5


• Current Density (A/dm²): 1.0 , 2,5


• Deposition Rate (mg/Amin): 22


• pH value: 3.5 – 4.5


• Movement: Movement of electrolyte or work pieces


• Anodes: Titanium, platinized


• Tank material: glass, acid resistant plastic


• Density (g/cm³): 16 – 17.5


• Hardness (HV): 120 - 145


• Layer thickness (µm): < 10

Supply form: ready for use
Content (l): 1
Colour: SI (light yellow)
Original Wieland No. 3080100702
Hazardous material: YES
Regeneration: After analysis, add regeneration concentrate 1 & 2 (ratio 1:1).


**The content of precious metal will be charged according to the daily quotation !